池州附近想过夜电话联系

 UPS power supply_ Redstone Electronic Equipment Co., Ltd

Shandong Leisidun Electronic Equipment Co., Ltd Professional quality, sophisticated technology, complete range, after-sales guarantee
National Service Hotline: 400-832-3938

News Center

CONTACT contact information

UPS power supply_ Redstone Electronic Equipment Co., Ltd

Shandong Leisidun Electronic Equipment Co., Ltd

Address: No.168, jiluo Road, Tianqiao District, Jinan City, Shandong Province

Telephone: 400-832-3938

Gu Hua: 0531-58105983

Mail box: 389837456@qq.com

Mobile phone number: 13954131233 Wang Xinhua

Mobile phone number: 15810819788 Ji Xuejiao


National service hotline 400-832-3938
News Center Current location: home page >> News Center
Description of apcups power panel, detailed explanation of the function of each indicator light
Release time: December 3, 2019 13:52:00 hits: 177

We are in contact with the use of APC UPS power supply, for many of the precautions are required, we have a certain understanding and grasp, in this small for us to briefly introduce the use of APC UPS power system precautions. Pay attention to Oh

 Apcups illustration.jpg

(1) APC UPS power supply host does not require high ambient temperature, which can work normally from + 5 ℃ to 40 ℃. However, indoor cleaning and less dust are required. Otherwise, dust and humidity will cause the operation disorder of the host machine. The temperature of energy storage battery is higher, and the standard operating temperature is 25 ℃, which can not exceed + 15 ℃ ~ + 30 ℃. If the temperature is too low, the capacity of storage battery will be reduced. Every time the temperature drops 1 ℃, the storage battery will be in good condition, The discharge capacity will increase with the increase of temperature, but the life will decrease. If it is used at high temperature for a long time, the life of the battery will decrease by half when the temperature is 10 ℃

(2) The parameters set in the host can not be changed at will. Especially for the parameters of the battery pack, it will directly affect its service life. However, with the change of ambient temperature, the floating charge voltage should be adjusted accordingly. Generally, 25 ℃ is taken as the standard. When the ambient temperature increases or decreases by 1 ℃, the floating charge voltage should be added with 18MV (relative to 12V battery)

(3) When no external power is supplied by the APC UPS power system itself, it is necessary to prevent the APC UPS power supply with load. The loads should be turned off first, and then the load can be opened after the APC UPS power system is started. Because there will be impact battery when the load is supplied instantaneously, the impact current of multiple loads and the required power supply current will cause instantaneous overload of APC UPS power supply, and the converter will be damaged in severe cases

 Apcups power display.png

(4) According to the operation requirements, the power margin of APC UPS power supply system is not large, so it is necessary to prevent adding high-power rated equipment at will and not allow long-term operation under full load condition. However, the nature of operation determines that APC UPS power supply system operates almost continuously. Adding high-power load, even in the fully loaded state, will result in host failure, Severe damage to the converter

(5) The output voltage, waveform, frequency and fluctuation of self provided generator shall meet the requirements of APC UPS power supply for input voltage. In addition, the power of generator shall be far greater than the rated power of APC UPS power supply. Otherwise, if any condition is not satisfied, APC UPS power supply will be abnormal or damaged

(6) Because the voltage of the combined battery pack is very high, there is a risk of electric shock. Therefore, when loading and unloading the conductive connecting bar and the output line, the insulation method should be selected, especially the anti-contact method for the output contact


Related news
Related products
Copyright Redstone Electronic Equipment Co., Ltd Luicp no.20013163-1